In our modern era, establishing a smooth connection among your devices is crucial for both professional and personal activities. The Linksys Velop setup printer mesh Wi-Fi system offers a reliable network solution for your home or office. When it comes to printing, integrating a Linksys Velop setup printer into your Linksys Velop network ensures effortless printing from any device connected to the network.

Setting Up Using WPS (Wi-Fi Protected Setup)

Connecting your devices to your network can be done quickly and easily using WPS (Wi-Fi Protected Setup). Here’s a simple guide for Linksys Velop setup printer

• Turn on the printer by plugging it into a power source.
• Put the printer in the area that your wireless router can reach.
• Press and hold the WPS button on your printer until the light starts blinking.
• Press and hold the WPS button on your router until the light starts blinking.
• Await the printer’s network connection. The light on the printer should stop blinking or turn solid once it is connected.
• Install the printer driver software on your computer. YUsually, the printer manufacturer’s website has the driver software.
• Print a test page to see how the connection holds up.

If you encounter any problems during the  Linksys Velop setup printer process, consult the user manuals for your printer and Linksys router or contact the respective manufacturers’ technical support for assistance.

Setting Up Using the Web-Based Method

Sure, here’s an easy-to-understand guide on setting up a wireless printer 

• Turn on the printer by plugging it into a power source.
• Plug the printer’s power cord into an outlet and turn it on.
• Open a web browser on a computer connected to your Linksys network.
• In the address bar, type the router’s IP address (usually 192.168.1.1).
• When prompted, enter the password and username for the router.
• Find the section labeled “Printer Settings,” “Network Attached Storage (NAS),” or “Print Server.” The exact location of the printer settings may vary depending on your router model.
• Click the “Add Printer” button or similar option.
• Enter your printer’s Wi-Fi network name (SSID) and password
• Click the “Save” or “Apply” button. Your Linksys router should now recognize your wireless printer.

Try printing a test page from your computer or mobile device. If you can print successfully, then your printer is properly connected to your Linksys network.

Also Read:- Linksys Velop troubleshooting

Reset Linksys Velop printer :

• Turn on the Linksys Velop printer and give it time to finish booting up.
• For roughly five to ten seconds, press and hold the printer’s reset button.
• The printer’s LED lights will periodically blink or flash to show that the reset procedure is underway.
• Watch for the LED lights to solidify—a sign that the reset is finished—and stop blinking.
• You will need to re-configure the printer using the Linksys app or web interface after it has rebooted.

Firmware Update for Linksys Velop setup printer

Maintaining the latest firmware on your Linksys Velop router is crucial for ensuring optimal performance, security, and feature enhancements. Firmware updates often address known bugs, improve stability, and introduce new functionalities to your network. Here’s a step-by-step guide on how to update the firmware on your Linksys Velop router:

• Open a web browser and enter the IP address 192.168.1.1 in the address bar.
• Enter your router’s username and password, which are typically printed on a label attached to the router.
• Go to the router’s settings menu and select the “Administration” or “Firmware Update” section.
• Click the “Check for Updates” button. If an update is available, it will be displayed. Click the “Download” button to download the firmware update file.
• Once the download is complete, click the “Update” button to initiate the firmware update process.
• A few minutes will pass while the
• Once the update is complete, the router will reboot automatically. After the reboot, check the firmware version to confirm the update has been successfully installed.

Linksys Router to wireless Printer Connections:

• Turn on the printer by plugging it into a power source.
• On a PC linked to your Linksys network, launch a web browser.
• In the address bar, type the IP address of the router, which is typically 192.168.1.1.
• When prompted, enter the password and username for the router.
• The exact location of the printer settings may change based on the type of router you have.
• The “Print Server,” “Network Attached Storage (NAS),” or “Printer Settings” sections should be found by searching.
• Include a printer:
• Select the “Add Printer” button or an equivalent menu item.
• From the list of detected devices, pick your printer.
• When prompted, enter the password and Wi-Fi network name (SSID) of your printer.
• Save your edits, then execute them.

If you encounter any problems during the setup process, consult the user manuals for your printer and Linksys router or contact the respective manufacturers’ technical support for assistance.