When considering expanding the coverage of a wireless router, the conventional approach often involves using a range extender. However, with the evolution of technology, mesh WiFi has become a game-changer in the networking industry. Innovations like the ‘ Linksys MX10 Velop AX Mesh WiFi 6 system ‘ revolutionizing the way users experience seamless internet coverage throughout their homes, even in the most remote areas.
If you’ve recently transitioned to the Linksys MX10 Velop AX Mesh WiFi 6 system and require assistance with the setup process, this blog will guide you through it. You’ll find detailed instructions on accessing the login page, configuring network settings, and adding additional nodes to enhance your setup. But before delving into the setup, let’s explore a bit about Mesh technology!
Table of Content:
- Essential Components for Setting Up Linksys MX10
- Linksys MX10 Velop Setup WPS method
- Linksys MX10 Velop Setup Web-Based
- Frequently Asked Questions(FAQs)
Essential Components for Setting Up Linksys MX10
- Linksys MX10 Velop AX Mesh WiFi 6 System:
Ensure you have the complete Linksys MX10 Mesh WiFi system, including the main router and any additional nodes you plan to install for extended coverage.
- Power Cables:
Have the necessary power cables for each Linksys MX10 device. Verify that the power supply is correctly connected to them.
- Ethernet Cable:
You may need an Ethernet cable to establish a wired connection between the main router and your modem during the initial setup process.
Ensure you have a functional modem that is compatible with the Linksys MX10 system. This is essential for connecting to your Internet service Provider (ISP).
- Internet Service Provider (ISP) Information:
Keep your ISP credentials and information handy. You may need this during the setup to configure the connection between the router and your internet service.
- Compatible Device:
Have a computer, laptop, or mobile device ready for the initial configuration. This device will be used to access the Linksys MX10 setup interface.
- Web Browser:
Use a web browser such as Google Chrome, Mozilla Firefox, or Safari to access the Linksys MX10 setup page. Ensure your browser is up-to-date for optimal compatibility.
- Linksys App :
Consider downloading the Linksys app on your mobile device for a user-friendly setup experience. The app can guide you through the configuration process.
By having these essential components ready, you’ll be well-prepared to set up your Linksys MX10 Velop AX Mesh WiFi 6 system seamlessly.
Linksys MX10 Velop AX Mesh WiFi 6 System Setup using WPS method
- Power Up: Connect the parent node to your existing modem or router using the provided Ethernet cable. Turn on both devices and wait for the parent node’s LED to turn solid purple.
- WPS Activation: Locate the WPS button on both the parent node and your existing modem or router. Simultaneously press and hold the WPS buttons on both devices for 3-5 seconds.
- Connection Confirmation: Monitor the parent node’s LED. Once it turns solid white, the WPS connection has been successfully established.
Linksys MX10 Velop AX Mesh WiFi 6 System Setup using Web-Based Method
- Connect to the Parent Node: Link your computer or mobile device to the default WiFi network of the parent node, usually named “LinksysVelop0” or “LinksysVelop1.”
- Launch Web Browser: Open a web browser and enter the default IP address, 192.168.1.1, into the address bar.
- Create an Admin Account: Follow on-screen instructions to generate a new administrator account for your mesh WiFi system.
- Customise WiFi Settings: Opt for a personalised WiFi network name (SSID) and password.
- Placement Optimization: Strategically position the nodes throughout your home for maximum coverage and signal strength.
Frequently Asked Questions (FAQs):
Q: What is the default IP address for the LINKSYS MX10 VELOP AX MESH WIFI 6 SYSTEM?
A: The default IP address is 192.168.1.1.
Q: How do I reset the LINKSYS MX10 VELOP AX MESH WIFI 6 SYSTEM?
A: Press and hold the reset button on the parent node for 5-10 seconds.
Q: How do I update the firmware of the LINKSYS MX10 VELOP AX MESH WIFI 6 SYSTEM?
A: Check for available firmware updates through the web interface and follow the on-screen instructions.
Q: How do I configure the LINKSYS MX10 VELOP AX MESH WIFI 6 SYSTEM as an access point?
A: Access the web interface, navigate to the Advanced Settings menu, and select the “Wireless” option. Choose the desired node and enable “Access Point Mode.”
Q: How do I troubleshoot connectivity issues with the LINKSYS MX10 VELOP AX MESH WIFI 6 SYSTEM?
A: Check physical connections, ensure optimal node positioning, and restart the system. If issues persist, contact Linksys support.