The Linksys Velop MX8400 is a game-changer for anyone who wants to ditch the frustration of slow and unreliable Wi-Fi. This powerful mesh system blankets your entire home in a blanket of blazing-fast Wi-Fi 6, eliminating dead zones and ensuring smooth streaming, gaming, and browsing for all your connected devices.

Whether you have a sprawling multi-story home or a cramped apartment, the Velop MX8400 can handle it all. Its modular design allows you to add nodes as needed to expand your coverage and ensure optimal performance even in the furthest corners of your living space.

Getting Started with the Linksys Velop MX8400:

Setting up the Velop MX8400 is a breeze. You can choose from two methods: WPS and web-based setup.

Linksys Velop MX8400 Setup via WPS method

1. Connect the Velop node to your modem using an Ethernet cable.
2. Power on the node and wait for the LED to turn solid Green.
3. Press the WPS button on your router and then on the Velop node within 2 minutes.
4. The Velop node will automatically connect to your network.

How to Web based setup the Linksys Velop MX8400

1. Connect your computer or mobile device to the Velop node’s default Wi-Fi network (printed on the bottom of the node).
2. Launch a browser and go to 192.168.1.1.
3. Follow the on-screen instructions to set up your Velop system and customise your network settings.
4. After that, the extension that was installed in the region with poor internet will be relocated.
5. The manual approach was applied with success, and the quality of your wifi was improved.

Logging In to Your Velop System:

Once you’ve set up your Velop system, you can manage your network settings and access additional features through the Linksys app or web interface.

To log in to the Linksys app:

1. Download the Linksys app from the App Store or Google Play Store.
2. Open the app, then register for an account or sign in with an already-existing one.
3. Select “Add Device” and follow the on-screen instructions to add your Velop system.

To log in to the web interface:

1. Launch a browser and go to 192.168.1.1.
2. Enter your administrator username and password.
3. Click “Log In.”

Also Read : Linksys Velop Tri-Band

Linksys Velop Without App

Linksys Velop purple light

Linksys Velop MX8400 Reset Process

If you need to reset your Velop system to its factory default settings, you can do so using the reset button on the node.

1. Locate the device’s reset button first.
2. Your smartphone’s side panel can have a reset button. This side button has a tiny hole that you can insert a paperclip into and hold it there for ten to fifteen seconds. 
3. then the side light on your gadget will begin to flicker. 
4. Your smartphone will automatically turn off and finish the reset procedure in a few minutes. 

Updating Linksys Velop MX8400  Firmware

Linksys regularly releases firmware updates for the Velop MX8400 to improve performance and security. To update the firmware:

1. Open the Linksys app or web interface.
2. Go to the “Settings” menu.
3. Select “Firmware Upgrade.”
4. Look for updates that are available, then install them by following the prompts on the screen.

Using Your Velop MX8400 as an Access Point:

If you already have a router and want to extend your network coverage, you can configure your Velop MX8400 as an access point.

1. Open the Linksys app or web interface.
2. Go to the “Settings” menu.
3. Select “Operation Mode.”
4. Select “Access Point” from the available choices.
5. Follow the on-screen instructions to configure your Velop node as an access point.

Conclusion

The Linksys Velop MX8400 offers an unparalleled whole-home mesh Wi-Fi experience. With Wi-Fi 6 technology, intelligent mesh, expansive coverage, and advanced security features, it ensures fast, reliable connectivity for modern households. The MX8400 is a superb choice for seamless, high-performance internet access in every corner of your home.