How Can I Fix My Linksys router Invalid IP Address Range?

Are you irritated that there is a problem preventing you from accessing the Internet? Apparently, a few of your users have complained about their Linksys router invalid IP address range. They are unable to connect the router to the internet since they are seeing this specific error message on their screen. We are well aware of how irritated you are about this invalid IP preventing you from accessing the internet.

Configure the Linksys router invalid IP address to Fix the Error

You can avoid IP address conflicts while connecting your router to another router or between your router and modem by changing the Linksys router Invalid IP Address. Use the procedures listed below to modify a router’s IP address.

Log in to your Linksys cloud account first.
Select the Connectivity button after logging into your account.
Next, choose the tab for the local network.
Locate and select the Edit option next to Router Details.
Type in the desired IP address, which should be within the given range: (10.0.0.0 to 10.255.255.255, 172.31.255.255 to 172.16.16.0, or 192.168.0.0 to 192.168.255.255)
You can modify the Start IP address to match your router’s IP range (2-254) under the DHCP Server options.
At this point, you must click the Apply button that is visible in the screen’s lower right corner.
Next, select the OK button that appears above the pop-up notification.
Lastly, turn off and then turn on your router for around thirty seconds.

By putting the aforementioned strategies into practice, you can resolve the Linksys router Invalid IP Address range.

How to change Linksys router Invalid IP Address?

Select it to modify the information. Input your router’s IP address here.

To view the “Connectivity” tab, you must log into your Linksys cloud account. You now have to choose the ‘Local Network’ option. Your Linksys Velop router’s details will be displayed to you.
Select it to modify the information. Input your router’s IP address here.
Select “DHCP Server” and then “Start IP address on the same IP range of your router” to make a change.
Implement the modifications that have been made thus far. For a brief period, your Linksys Velop router will shut off.

Also Read:- Linksys Velop Setup with ios device

FAQ’s

Q. What does “Invalid IP Address Range” mean on my Linksys Router?

A. If you encounter the “Invalid IP Address Range” message on your Linksys Router, it indicates a misconfiguration in the assigned IP address range for your local network. This issue can disrupt the proper functioning of your network and internet connectivity.

Q. How do I access the router settings to fix the Invalid IP Address Range issue?

A. To resolve the Invalid IP Address Range problem, access your Linksys Router’s web-based setup page. Open a web browser, type the router’s IP address (commonly 192.168.1.1 or 192.168.0.1) in the address bar, and log in using your router credentials.

Q. What steps should I take to correct the Invalid IP Address Range?

A. Once logged into the router’s settings, navigate to the “LAN” or “Network” section. Locate the DHCP settings and ensure that the assigned IP address range is valid for your network. Adjust the starting and ending IP addresses to fall within the appropriate range,

Q. Can I manually set the IP address range to resolve the issue?

A. Yes, if the router’s automatic DHCP configuration is causing the problem, you can opt for manual IP address assignment. In the router settings, disable DHCP and manually set the IP address, subnet mask, gateway, and DNS server information for each device on your network.

Q. What should I do if the issue persists after making adjustments?

A.If the problem persists, try power-cycling your router by turning it off, unplugging it for about 30 seconds, and then powering it back on. Additionally, ensure that all connected devices are configured to obtain IP addresses automatically. If the issue persists, consider reaching out to Linksys support for further assistance.